Urban Energy Storage & Recovery

Make urban energy work together.

Integrate long-duration storage, renewables and flexible demand through one governed Digital Twin.

Prepared for the EIC Multi-Procurer Day, Grenoble 2026.

Urban energy network around an AI Digital TwinIllustrative scene, Midday surplus. Solar PV: surplus, supplying the site. Wind: generating, supplying the site. Grid: export limited, receiving power. Municipal buildings: served, receiving power. BESS / LDES: charging, receiving power. EV charging: managed charging, receiving power.
  • Solar PV
    surplus
  • Wind
    generating
  • Grid
    export limited
  • Municipal buildings
    served
  • BESS / LDES
    charging
  • EV charging
    managed charging

Midday surplus. Solar exceeds demand. The Digital Twin recommends charging storage and shifting flexible load into the solar window. Illustrative scene, not live data.

01The Urban Energy Challenge

Cities already own the assets. What is missing is one operating picture.

Storage and energy recovery only pay off when efficiency, cost and decarbonisation are managed together, not in separate tools.

Disconnected systems

Each asset is optimised on its own, and nothing coordinates them.

  • Rooftop and car-park PV
    Inverter portal, separate contract
  • Battery storage
    Vendor BMS dashboard
  • EV charging
    Charge-point management system
  • Buildings, heat and recovery
    Building and plant controls
Integrated municipal energy

One governed Digital Twin sits above existing systems and replaces none of them.

  • A shared forecast of generation, demand and flexibility
  • Storage, PV, EV charging, buildings and heat scheduled together
  • Recommendations checked against connection and tariff constraints
  • One evidence trail from decision to outcome
EfficiencyBroader applicationsLower energy costFaster decarbonisation

Navigato is software and integration. We do not manufacture every storage technology on this page. Hardware comes from technology providers. Navigato supplies the Digital Twin, forecasting, optimisation, governed recommendations and evidence layer, and stays vendor-neutral. Maturity labels are general and must be confirmed per project.

Storage and recovery technologies: what fits where

Battery storage (BESS)

Fast response and daily shifting. Typically minutes to a few hours of duration.

Examples
Lithium-ion (including LFP), sodium-ion
Maturity
Commercial
Data Navigato needs
State of charge, state of health, temperature, power limits, warranty constraints

Long-duration energy storage (LDES)

Multi-hour to multi-day shifting where daily cycling is not enough. Fit depends on site and use case.

Examples
Flow batteries, sensible and latent thermal storage, compressed-air and hydrogen routes
Maturity
Mixed: some commercial, some early commercial or emerging
Data Navigato needs
Round-trip efficiency, charge and discharge limits, standing losses, ramp behaviour

Thermal recovery integration

Reusing waste or surplus heat to cut electricity and gas demand and to smooth peaks.

Examples
Heat pumps, wastewater and process heat recovery, data-centre heat, district-heating links
Maturity
Commercial components, site-specific integration
Data Navigato needs
Flow and return temperatures, thermal storage level, heat-demand profile, network constraints
02Energy Intelligence Architecture

Integrated energy system architecture, from assets to evidence

Select a stage to see what it captures. The flow is read-first and human-approved: recommendations come before any control.

Every energy asset gets an identity

PV, batteries, thermal stores, heat pumps, chargers, meters and buildings are registered with ownership, ratings and topology.

Captured
  • Capacity, power and efficiency ratings
  • Position in the electrical and thermal network
  • Owner, operator and warranty status
Protocol and interface details
Typical interfaces, where supported
  • Modbus, OPC UA and IEC 61850 for plant and substations
  • MQTT and vendor APIs for inverters and battery management systems
  • BACnet-class building systems, OCPP for chargers
  • Smart-meter data, weather and tariff feeds
Thermal recovery and V2X integration

Thermal: heat pumps, wastewater and process heat recovery and the state of thermal stores are modelled alongside electricity, so heat and power are scheduled together.

V2X: managed charging comes first. Bidirectional use is considered only where the vehicle, hardware, regulation, grid-operator approval and customer consent allow it. Navigato does not take part in energy markets.

03Interactive Scenario Lab

Test a site before anyone buys hardware

Change PV, storage, tariffs, EV load, grid limits and flexibility. The model balances energy hour by hour and compares a baseline day with an optimised one. Everything here is simulated.

Scenario inputs

Quick start
Illustrative city concepts

Illustrative parameter sets, not statements of any city’s requirements. No partnership or pilot with these cities is implied.

Loaded: Spring weekday pilot. Adjust any control to continue from here.

Day profile
500 kWp

Rooftop and car-park PV across the municipal cluster.

1,000 kWh

Nominal. Usable window 10–95% of capacity.

250 kW

Implied duration 4.0 h at full power.

600 kWh/day

Depot and public charging, weighted toward the evening arrival peak.

15 %

Share of EV and HVAC-type load that can move within ±4 hours.

1.0 ×

Scales the gap between cheap and expensive hours. Ignored for flat price.

9 €/kW·month

Raise this to make the optimiser prioritise peak shaving.

700 kW

Connection capacity at the site.

250 kW

PV above this is curtailed when it cannot be stored or used.

Simulated result. Peak grid import 406 kilowatts baseline versus 382 optimised. PV self-consumption 100 percent versus 100 percent. Curtailed energy 0 versus 0 kilowatt-hours.

SIMULATEDSynthetic 24-hour site profile, optimised with perfect foresight. Read results as an upper bound on what scheduling could do, not as measured data or a forecast of savings.
Peak grid import
382kW
Baseline 406
−24 kW (−6%) improvement
PV self-consumption
100%
Baseline 100
±0 no change
Curtailed PV energy
0kWh
Baseline 0
±0 no change
Energy + demand-charge cost
1,146€/day
Baseline 1,312
−165 €/day (−13%) improvement
Battery throughput
761kWh/day
Baseline 0
+761 kWh/day change
Import above grid limit
0kWh
Baseline 0
±0 no change
Grid exchange, baseline vs optimisedkW · import + / export −
  • Baseline
  • Optimised
Site balancekW
  • PV generation
  • Load, baseline
  • Load, optimised
Battery powerkW · charge + / discharge −
  • Charging
  • Discharging
Battery state of chargekWh
  • State of charge
Open this scenario in the demo dashboard Opens a clearly marked simulated demo scenario with these inputs.
All metrics, baseline vs optimised
Simulated metrics for the baseline and optimised cases
MetricBaselineOptimisedChange
Peak grid import (kW)406382−24 kW (−6%) improvement
PV self-consumption (%)100100±0 no change
Curtailed PV energy (kWh)00±0 no change
Energy + demand-charge cost (€/day)1,3121,146−165 €/day (−13%) improvement
Battery throughput (kWh/day)0761+761 kWh/day change
Import above grid limit (kWh)00±0 no change
Grid import energy (kWh)6,0806,160+80 kWh (+1%) increase
Grid export energy (kWh)00±0 no change
Modelled emissions from imports (kg CO₂)1,7021,725+22 kg CO₂ (+1%) increase
Equivalent battery cycles (per day)00.90
Hourly data table
Hourly simulated values for the optimised case
HourPV kWLoad base kWLoad opt kWGrid base kWGrid opt kWBattery kWSoC kWh
00:0002073122073120507
01:00019618519626075578
02:000189178189346168738
03:00018917818919719755
04:00019718719726175826
05:000227251227382131950
06:00142882722752590950
07:00623643423022810950
08:001194173932982740950
09:001754374132612370950
10:002224345842123620950
11:002524254011731490950
12:002634203961571330950
13:002524244001721480950
14:002224314072091850950
15:001754324592572840950
16:001194344073152880950
17:0062434407372110-235702
18:0014419393406144-235454
19:000386359386258-101348
20:000333311333160-151189
21:000282264282376112295
22:000243227243377149436
23:00022130422137975507
Model assumptions and limits
  • One synthetic 24-hour day per run, repeated cyclically. The battery must end the day at or above its starting state of charge (50%).
  • Hour-by-hour energy balance with a round-trip efficiency of 90%, a usable state-of-charge window of 10–95% and hard charge/discharge power limits.
  • The optimised schedule is a cost-minimising dynamic programme with perfect foresight of the day. Real operation would rely on forecasts and would perform worse.
  • Cost includes energy, a daily share of the demand charge, and a €0.03/kWh battery wear allowance. Exports are valued at 45% of the import price.
  • Flexibility moves a share of EV and HVAC-type load by up to ±4 hours toward cheaper or solar-rich hours, conserving total energy.
  • Emissions use a fixed illustrative grid factor of 0.28 kg CO₂/kWh.
  • Not modelled: battery ageing, temperature, thermal storage dynamics, network losses, ancillary-service markets, or any market participation.
  • All values are SIMULATED. They illustrate how the method behaves, not what any site will achieve. Pilot targets would be set only after baseline validation.
04Smart Battery Passport & Lifecycle Intelligence

A battery that carries its own record

Navigato AI is working with Industrial Batteries Bulgaria, a confirmed partner, on a Smart Battery Passport concept that links each battery to its identity, condition and lifecycle.

Smart Battery Passport
Illustrative record
ILLUSTRATIVE DATA
Battery ID
EXAMPLE-0001
Serial number
SN-ILLUSTRATIVE
Chemistry
LFP (example)
Rated capacity
500 kWh (example)
State of charge
64%
State of health
97%
Warranty
Active, cycle-limited
Second-life status
Not assessed
Certificates
Maintenance log
Recycling info

The identity code is a drawing, not a scannable QR code. Values are examples to show the data model.

Follow the lifecycle

Identity is created

The manufacturer registers the battery: unique identifier, chemistry, rated capacity, production data and declarations, linked to a QR identity on the unit.

  • Serial number and batch
  • Chemistry and rated capacity
  • Declarations and certificate documents supplied by the manufacturer
What this is, and is not
Is
  • A confirmed partnership with Industrial Batteries Bulgaria
  • A concept and data model for passport-linked battery intelligence
Is not
  • A validated deployment
  • A certified battery-passport implementation
  • Proof of regulatory compliance
Regulatory note

Regulation (EU) 2023/1542 introduces digital battery passport requirements for certain battery categories from 2027. This concept is designed to support such data needs. Compliance for any product depends on its manufacturer, the data it supplies and a formal assessment.

05Proposed 90-day City Pilot

One site. Five phases. Procurement-ready outputs.

A bounded pilot that ends with evidence a procurement team can use.

  1. Days 1–15

    Discovery

    Choose one site and one measurable challenge.

  2. Days 16–35

    Baseline

    Reconstruct and validate the current operating pattern.

  3. Days 36–60

    Integration

    Connect read-only feeds and build the site Digital Twin.

  4. Days 61–80

    Simulation

    Run scenarios and issue recommendations; no autonomous dispatch.

  5. Days 81–90

    Outputs

    Compare with the baseline and assemble the evidence pack.

Phase activities and outputs

Discovery Days 1–15

  • Choose one site and one measurable challenge
  • Inventory assets, meters and data sources
  • Agree integration boundaries and data access

Output Scope and data map

Baseline Days 16–35

  • Collect load, PV and tariff history
  • Reconstruct the current operating pattern
  • Validate the baseline with the site owner

Output Validated baseline

Integration Days 36–60

  • Connect read-only data feeds
  • Build the site Digital Twin
  • Check data quality and gaps

Output Live-data Digital Twin

Simulation Days 61–80

  • Run storage, flexibility and tariff scenarios
  • Issue recommendations in Recommendation Mode
  • Review with operators; no autonomous dispatch

Output Scenario results and recommendations

Outputs Days 81–90

  • Compare outcomes with the validated baseline
  • Assemble evidence pack and audit trail
  • Prepare procurement-ready specification inputs

Output Procurement-ready outputs

Pilot KPIs and how they are measured
Pilot KPIs, what they show, how they are measured and how targets are set
KPIWhat it showsHow it is measuredTarget
Peak kWHighest grid import in the periodMetered import, compared with baselineSet after baseline validation
Self-consumptionShare of PV used on sitePV generation versus export and curtailmentSet after baseline validation
Curtailed kWhPV that could not be used or storedInverter and export-limit recordsSet after baseline validation
Energy costsEnergy plus demand chargesTariff applied to metered dataSet after baseline validation
Battery throughputEnergy cycled through storageBattery management system dataSet after baseline validation
Operational availabilityShare of time assets and data feeds are usableSystem uptime and data-feed logsSet after baseline validation

All outcome targets are set after baseline validation.

  • Horizon 2020, grant agreement No 886231. The Navigato project received EU funding under call H2020-SMEInst-2018-2020-1.
  • Selected for EIC SPIN4EIC 2026. Selected to pitch at the EU Cities Mission Conference 2026 in Turin, 28 May 2026.

This page describes a solution concept prepared for the EIC Multi-Procurer Day, Grenoble 2026. The EU funding and selection above relate to the Navigato project and its earlier work. They do not mean the European Commission or the EIC has funded, evaluated or endorsed this solution.

This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 886231.

Project: Navigato  ·  Call: H2020-SMEInst-2018-2020-1  ·  Programme: H2020

One city. One energy site. One measurable challenge.

Pick the site, the challenge and the data. We define the use case, integration boundaries and measurable pilot outcomes together.

Scenario Lab and demo dashboard values are simulated. Navigato AI does not operate energy assets or participate in energy markets, and storage hardware is supplied by third-party technology providers.